Studies of monomer impregnation and polymerised in situ in wood using dynamic mechanical thermal analyser.

Ten tropical hardwoods are impregnated with methyl methacrylate and polymerised in‐situ by use of catalysts and heat techniques. Treatability of the wood, as determined from the fractional volumetric retentions of monomers that are a fraction of voids filled by the impregnant, showed that the mean retention range from 15·03% (Acacia Mangium) to 56·59% (Cratoxylum Arborescens). The penetration of the monomer evaluated using ultrasonic waves showed that the treated wood had higher velocities which indicated significant increase in density. The present paper deals with the viscoelastic relaxation of polymerised treated wood. The efficiency of the monomer as a plasticiser is studied through the temperature dependence of the storage modulus (E′) and loss tangent (tan δ) of treated and untreated wood by dynamic mechanical thermal analysis (DMTA) over a temperature in the range from −100 to 200°C. The storage modulus E′ decreased with temperature and as the maximum mechanical damping developed, the glass transition temperature (T g) of the plasticised wood decreased with the plasticiser content

Operation speed of polariton condensate switches gated by excitons

We present a time-resolved photoluminescence (PL) study in real- and momentum-space of a polariton condensate switch in a quasi-1D semiconductor microcavity. The polariton flow across the ridge is gated by excitons inducing a barrier potential due to repulsive interactions. A study of the device operation dependence on the power of the pulsed gate beam obtains a satisfactory compromise for the ON/OFF-signal ratio and -switching time of the order of 0.3 and $\thicksim50$ ps, respectively. The opposite transition is governed by the long-lived gate excitons, consequently the OFF/ON-switching time is $\thicksim200$ ps, limiting the overall operation speed of the device to $\thicksim3$ GHz. The experimental results are compared to numerical simulations based on a generalized Gross-Pitaevskii equation, taking into account incoherent pumping, decay and energy relaxation within the condensate.Comment: 11 pages, 11 figure

Optical control of spin textures in quasi-one-dimensional polariton condensates

We investigate, through polarization-resolved spectroscopy, the spin transport by propagating polariton condensates in a quasi one-dimensional microcavity ridge along macroscopic distances. Under circularly polarized, continuous-wave, non-resonant excitation, a sinusoidal precession of the spin in real space is observed, whose phase depends on the emission energy. The experiments are compared with simulations of the spinor-polariton condensate dynamics based on a generalized Gross-Pitaevskii equation, modified to account for incoherent pumping, decay and energy relaxation within the condensate.Comment: 10 pages, 9 figure

Comparison of acidic and enzymatic pectin extraction from passion fruit peels and its gel properties

The influences of extractor concentration, extraction temperature and time on the yield of pectin and degree of esterification (DE) were investigated by the acidic and enzymatic extraction methods. Citric acid and Celluclast were selected as pectin extractors for environmentally friendly reasons. The peels of yellow passion fruit using the acidic and enzymatic extraction methods gave pectin yield of 7.16 and 7.12%, and DE of 71.02 and 85.45% in the optimized condition of extraction time of 102 min with citric acid concentration of 0.19% (w/w) at 75C and Celluclast concentration of 1.67% (w/w) at 61.11C, respectively. The enzymatic extraction method has greater capability of producing high methoxyl pectin. The morphological features of fruit peel powder and the extracted pectin examined by scanning electron microscopy suggested that the nanostructure of wet passion fruit pectin was dependable on the type of extraction process. The formed pectin gel also has pseudoplastic liquid behavior and its viscosity was greatly affected by sugar. Pectin has been intensively used as natural gelling agent and stabilizer to alter rheological properties in food ingredients by most food processing industries to achieve desired textural quality. Pectin could be recovery from fruit wastes. The conversion of passion fruit peel into pectin offers great scope for utilization. Citric acid and enzymatic extraction methods are effectively used for pectin extraction which may be of interest by pectin industry and consumer with these eco-friendly processing technology with no using harmful chemicals. Furthermore, scientific work of this study such as the optimized condition, morphological features of extracted pectin and pectin gel formation contributes valuable information on pectin, which could be beneficial for pectin industry improving the process quality of pectin as well as process profitability

Energy relaxation of exciton-polariton condensates in quasi-1D microcavities

We present a time-resolved study of energy relaxation and trapping dynamics of polariton condensates in a semiconductor microcavity ridge. The combination of two non-resonant, pulsed laser sources in a GaAs ridge-shaped microcavity gives rise to profuse quantum phenomena where the repulsive potentials created by the lasers allow the modulation and control of the polariton flow. We analyze in detail the dependence of the dynamics on the power of both lasers and determine the optimum conditions for realizing an all-optical polariton condensate transistor switch. The experimental results are interpreted in the light of simulations based on a generalized Gross-Pitaevskii equation, including incoherent pumping, decay and energy relaxation within the condensate.Comment: 15 pages, 20 figure

Dynamics of a polariton condensate transistor switch

We present a time-resolved study of the logical operation of a polariton condensate transistor switch. Creating a polariton condensate (source) in a GaAs ridge-shaped microcavity with a non-resonant pulsed laser beam, the polariton propagation towards a collector, at the ridge edge, is controlled by a second weak pulse (gate), located between the source and the collector. The experimental results are interpreted in the light of simulations based on the generalized Gross-Pitaevskii equation, including incoherent pumping, decay and energy relaxation within the condensate.Comment: 4 pages, 2 figure

Spin Selective Filtering of Polariton Condensate Flow

Spin-selective spatial filtering of propagating polariton condensates, using a controllable spin-dependent gating barrier, in a one-dimensional semiconductor microcavity ridge waveguide is reported. A nonresonant laser beam provides the source of propagating polaritons while a second circularly polarized weak beam imprints a spin dependent potential barrier, which gates the polariton flow and generates polariton spin currents. A complete spin-based control over the blocked and transmitted polaritons is obtained by varying the gate polarization.Comment: 5 pages, 4 figure

Towards optimising distributed data streaming graphs using parallel streams

Modern scientific collaborations have opened up the op-portunity of solving complex problems that involve multi-disciplinary expertise and large-scale computational experi-ments. These experiments usually involve large amounts of data that are located in distributed data repositories running various software systems, and managed by different organi-sations. A common strategy to make the experiments more manageable is executing the processing steps as a work-flow. In this paper, we look into the implementation of fine-grained data-flow between computational elements in a scientific workflow as streams. We model the distributed computation as a directed acyclic graph where the nodes rep-resent the processing elements that incrementally implement specific subtasks. The processing elements are connected in a pipelined streaming manner, which allows task executions to overlap. We further optimise the execution by splitting pipelines across processes and by introducing extra parallel streams. We identify performance metrics and design a mea-surement tool to evaluate each enactment. We conducted ex-periments to evaluate our optimisation strategies with a real world problem in the Life Sciences—EURExpress-II. The paper presents our distributed data-handling model, the op-timisation and instrumentation strategies and the evaluation experiments. We demonstrate linear speed up and argue that this use of data-streaming to enable both overlapped pipeline and parallelised enactment is a generally applicable optimisation strategy